Core Module Issue

[matyt]

I was testing my module, and I connected it to my pc, in order to burn MIOS (which seems that it isn't on my pic, bought from SmashTV), but i don't receive any upload request, instead, every two seconds I recieve a reset message, and a random Midi message.

i've done MIDI Troubleshooting and seems that my core works perfectly.

I hope that the ID isn't a problem, as the pic was supposed to work with a LTC module, which now it isn't used.

The id is 0000 0000 0000 0100, which was the one suggested by smashTV

I send also a screen of what I see in MIOS studio 8

Edit: Now Fullscale

[cimo]

I was testing my module, and I connected it to my pc, in order to burn MIOS (which seems that it isn't on my pic, bought from SmashTV),

SmashTV doesn t upload any MIOS on the pics, never afaik

I can t link to the image..

[seppoman]

that sounds like a baud rate issue, i.e. you're receiving crap because the pic sends the upload request at 38400 baud while your midi interface expects the standard 31250 baud. That's because of the 100 PIC ID, which selects the to-com interface via LTC module. I'm afraid there's only two possible solutions: 1) get the to-com/LTC interface working and upload the ChangeID application via serial Midi driver or 2) use a PIC burner to reset the ID.

S

[matyt]

Fixed! finished LTC module, Uploaded MIOS via Serial Driver, than the change id app.... and now is working properly...

thank you very much guys!