Help
Thanks to TK, Wilba, and SmashTV!
Stuck with Wilba's basic design; all parts bought from Smash, Mouser and the local hardware store. The indicator knobs do nothing for endless rotary encoders of course but I like their old school look!
Page 1 of 1
Another MB-6582 up and running
Rate Topic:
#1
- MIDIbox Newbie
-
- Group: Members
- Posts: 30
- Joined: 13-August 07
Posted 25 January 2009 - 17:39
Thanks to TK, Wilba, and SmashTV!
Stuck with Wilba's basic design; all parts bought from Smash, Mouser and the local hardware store. The indicator knobs do nothing for endless rotary encoders of course but I like their old school look!
#2
- MIDIbox Guru
-
- Group: Frequent Writer
- Posts: 8,850
- Joined: 25-February 03
- LocationMelbourne, Victoria, Australia
Posted 26 January 2009 - 00:47
Actually, the point(less)er knobs look nice, huh!
#3
- MIDIbox Hero
-
- Group: Administrators
- Posts: 3,284
- Joined: 27-August 03
- LocationMelbourne, Australia
Posted 26 January 2009 - 02:17
Congratulations! I like the green LCD... it actually goes well with the red LEDs. All you need now is a piece of 3mm acrylic (pref. smokey grey) to put between the LCD and panel, it hides that gap really well. (I also used a black Sharpie on the LCD cutout edge to stop it reflecting the LCD).
It's good to see I'm not the only one who can stick countersunk screws onto panels with JB-Weld:
It's good to see I'm not the only one who can stick countersunk screws onto panels with JB-Weld:
Share this topic:
Page 1 of 1