chimchim Posted January 25, 2009 Report Posted January 25, 2009 Thanks to TK, Wilba, and SmashTV!Stuck with Wilba's basic design; all parts bought from Smash, Mouser and the local hardware store. The indicator knobs do nothing for endless rotary encoders of course but I like their old school look!http://www.flickr.com/photos/bducklow/sets/72157611157922387/ Quote
stryd_one Posted January 25, 2009 Report Posted January 25, 2009 Actually, the point(less)er knobs look nice, huh! Quote
Wilba Posted January 26, 2009 Report Posted January 26, 2009 Congratulations! I like the green LCD... it actually goes well with the red LEDs. All you need now is a piece of 3mm acrylic (pref. smokey grey) to put between the LCD and panel, it hides that gap really well. (I also used a black Sharpie on the LCD cutout edge to stop it reflecting the LCD).It's good to see I'm not the only one who can stick countersunk screws onto panels with JB-Weld: Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.