chimchim Posted January 25, 2009 Report Posted January 25, 2009 Thanks to TK, Wilba, and SmashTV!Stuck with Wilba's basic design; all parts bought from Smash, Mouser and the local hardware store. The indicator knobs do nothing for endless rotary encoders of course but I like their old school look!http://www.flickr.com/photos/bducklow/sets/72157611157922387/
stryd_one Posted January 25, 2009 Report Posted January 25, 2009 Actually, the point(less)er knobs look nice, huh!
Wilba Posted January 26, 2009 Report Posted January 26, 2009 Congratulations! I like the green LCD... it actually goes well with the red LEDs. All you need now is a piece of 3mm acrylic (pref. smokey grey) to put between the LCD and panel, it hides that gap really well. (I also used a black Sharpie on the LCD cutout edge to stop it reflecting the LCD).It's good to see I'm not the only one who can stick countersunk screws onto panels with JB-Weld:
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now