Roelli Posted April 4, 2009 Report Share Posted April 4, 2009 Hi there. Iam thinking about buying 24 of the "ALPS REAON11M9A06" motorfaders. The datasheet says:Total resistance: 10kResistance taper: 1BSo I need to know if they will work with the ucapps "MF module". I think in europe B means log. But it seems that chinese manufacturers name B = linear. Whats correct?Thanks,Roelli. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted April 4, 2009 Report Share Posted April 4, 2009 It's been discussed before, but.... Don't take our word for it - ask the distributor :) Quote Link to comment Share on other sites More sharing options...
Roelli Posted April 4, 2009 Author Report Share Posted April 4, 2009 It's been discussed before, but.... Don't take our word for it - ask the distributor :)I already asked the distributor... and he gave me the link to a datasheet which says "10KB". Iam pretty sure that the distributor doesn't even know what lin or log is. ;)Do you have a link to the discussion on this forum? Can't seem to find it. Quote Link to comment Share on other sites More sharing options...
stryd_one Posted April 4, 2009 Report Share Posted April 4, 2009 My first sloppy attempt at a search came up with numerous hits, just looking for 'lin log fader'. I'm sure you could find much, much more with some extra searching.. I even found your thread from 2 years ago ;) Quote Link to comment Share on other sites More sharing options...
Roelli Posted April 5, 2009 Author Report Share Posted April 5, 2009 Yeah, sure... I can even find my own old postings... where for example someone corrected me... that potentiometers weren't measured in KB but kilo ohm. Very interesting! :-[ >:(And the wiki only says that both types of potentiometers.. "A" and "B" are mixed. >:(And the MF module website does not have any informations about this. I even don't know if its 100K or 10K. Iam pretty sure I need a linear taper... but I don't know how the chinese call their taper curves. ???Either this is a game - or you don't know it, too. Anyway - thanks for your help! :P Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.