Guest emorv Posted July 17, 2003 Report Share Posted July 17, 2003 I want to build a midibox, but not as the standard explained in the DIY projects. I want to have 24 knobs and 8 faders and a 16 track sequencer and ofcourse with a graphic LCD. Is this possible without modifing the original layout too much?and are their people here who did the same?thanks l8tr  ;) Quote Link to comment Share on other sites More sharing options...
pay_c Posted July 17, 2003 Report Share Posted July 17, 2003 Hmm, could be a hard one.As the graphic LCD is only supported by MIOS, you would have to reprogramm MIOS to a step sequencer. This is a hard one! I wouldn´t try that!!You could try that: Just built a normal MB64 and a MB64SEQ (4 track seq) and connect them together via MB Link as described on the page. But I really dont know, if the MB64 Seq supports the Link!So: Perhaps you should really stick to the normal stuff: Building a MB64Seq (with a character LCD) and a MIOS Midibox (with the 24 pots and 8 faders or more of those) and use the graphic LCD there via MIOS. You can link them together with a MIDI Merger, which is also available on the page. Another advantage of that: You also have two seperate devices, so you are more flexible.What do you think of that? Quote Link to comment Share on other sites More sharing options...
Guest emorv Posted July 17, 2003 Report Share Posted July 17, 2003 The 4 step sequencer is also good enough for the things i want. But you have 2 ainx modules supporting 64 rotary knobs, so i thought if i only use 1 ainx module and instead of 32 knobs, 24 and 8 faders. I thought the graphic lcd was not a big problem. Hmmm.. Well, anyone got other ideas?greetz Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.