protofuse Posted August 19, 2009 Report Share Posted August 19, 2009 hello,I think, as I'm a bad solderer, I had to make my own double-sided and coated PCB midibox modules in order to avoid bridge, short circuit etc...But another good reason could be to group modules on big pcb.so, the question is:could I get/download .sch of midibox modules?I found brd, but not .schhelp would be appreciated :)all the best, Quote Link to comment Share on other sites More sharing options...
lylehaze Posted August 19, 2009 Report Share Posted August 19, 2009 The schematics are available in PDF format.I don't think the Eagle sch files are available online,but you could probably create your own if you wanted to.Have Fun,LyleHaze Quote Link to comment Share on other sites More sharing options...
protofuse Posted August 20, 2009 Author Report Share Posted August 20, 2009 okif i finally decide to make my own midibox modules pcb, i'll share sch too :-) Quote Link to comment Share on other sites More sharing options...
liinnerd Posted August 20, 2009 Report Share Posted August 20, 2009 soldering the bridges is easier then making a complete new pcb I.M.O. ;)however grouping things on one larger pcb is a good idea! Quote Link to comment Share on other sites More sharing options...
protofuse Posted August 20, 2009 Author Report Share Posted August 20, 2009 I had more success in making my own big pcb for buttons, leds in my project than soldering ... as I can see :Pso...I began to calculate how it would cost moreI have to (re)buy all components for:3 AIN3 DIN2 DOUT2 CORESso... Quote Link to comment Share on other sites More sharing options...
Lorcan Posted September 8, 2009 Report Share Posted September 8, 2009 Hi, I redid the schemos from sratch, see this posthttp://www.midibox.org/forum/index.php/topic,13602.msg117036.html#msg117036I'll upload the rest soon Quote Link to comment Share on other sites More sharing options...
protofuse Posted September 9, 2009 Author Report Share Posted September 9, 2009 helloI began to make a big PCB with all modules connected.I didn't finish because I ordered the reliable modules from SmashTV:- double sided- coatedthey just arrived hom today :) Quote Link to comment Share on other sites More sharing options...
Lorcan Posted September 9, 2009 Report Share Posted September 9, 2009 Wow, the custom pcb must have cost a little fortune, no ? Quote Link to comment Share on other sites More sharing options...
protofuse Posted September 9, 2009 Author Report Share Posted September 9, 2009 I didn't finish this custom.but I did other custom for my project which you can see on my website.I just received the reliable midibox modules from SmashTV :) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.