midibox cv with 18f4620...?

[nuke]

hi there...sadly i fried my pic 18f452 somehow by using a faulty wallwart...because this was my only *452 pic i had, i decided to use my spare 18f4620 pic...i change the processor type in the "makefile.orig" and succesfully dumped the new hexfile "setup_j5_enabled.hex" in... now it works again but without the 8 gates on j5....only the two gates at the aout bord stuffed with the 2 max525 are working...is there something i could change to make these work again?

thanx...nik

[nuke]

never mind...it´s running now...my bankstick was broken too...removed it and without bankstick the j5 gates are now working...