Jump to content

MF module - sending control voltages for VCA


Recommended Posts

Posted

Hello and Merry Christmas.

I would like to use the MF module as a fader-automation in my mixing desk. The mixing desk itselfs has VCAs installed (volume control).

What about this idea:

Using the MF module to record and play fader moves (up..down) in a sequencer. Can I use any signal from the 74HC595 or the TC4427 of the motorfader module to control my vca's ?

The desks VCA need the following voltages: 0db is no attenuation/fader@top, 6,34V = full attenuation/fader down

Or is it possible to grab the voltage at the fader (linear track)?

Or:

Using the mf module and the AoutNG module? Is it possible to send the midi data to the sequencer and to the AoutNG module at the same time/same midi channel?

(the AoutNG looks good because of the adjustable control voltages)

I would like to record the fader moves in the sequencer. The VCAs were controlled by the motorfaders. When playing the recorded data... the signal should go to the vca signal and the motorfader.

Thanks,

Roelli.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...