SammichSID CS DOUT map

[Janis1279]

Hi

I have interest to build Wilba's sammichSID on standard MB project boards.

Do not find sammichSID CS DOUT map circuit .

SR# 1 6 x CATHODES ,

SR# 2 8 x ANODES I think.

Thanks in advance.

Janis

Edited March 14, 2010 by Janis1279

[Wilba]

You are correct.

Sorry I don't have a schematic publishable at the moment.

It should be easy enough to work out the pin assignments... most tracks are on the top layer.

Just remember that the left side is a MIRROR of the right.

i.e. D0->R1->LED anodes of two MIDDLE columns of three LEDs.

D7->R8->LED anodes of two OUTER columns of three LEDs.

http://midibox.org/forums/index.php?app=gallery&module=images&section=viewimage&img=37

[Wilba]

btw if you're interested, I can give you a spare control surface PCB (one of the black prototypes).

[Janis1279]

Thank you Wilba for a fast answer!

Regards,

Janis

[Janis1279]

Thanks, Wilba !

Left side 3 x 8 diodes :

SR#1 CATHODES rows from UPPER to LOWER D6, D4, D2

SR#2 ANODES from the LEFT to the RIGHT side D7-D0

Right side 3 x 8 diodes :

SR#1 CATHODES rows from UPPER to LOWER D7, D5, D3

SR#2 ANODES from the LEFT to the RIGHT side D0-D7

Regards,

Janis