GordTheRogue Posted May 7, 2010 Report Share Posted May 7, 2010 :smile: Hello to all! I've built a singlecore MB SID PIC:18f452,I've checked all connections and voltages, seems is all ok. I'm having weird characters on the display while turning on and while pressing the buttons. Cuold it be a bad programming error? Please watch the video and comment. Thanks a lot guys! :yes: PS The test tone program works, but it makes a very quiet tone, is it ok? Gord The Rogue Quote Link to comment Share on other sites More sharing options...
seppoman Posted May 7, 2010 Report Share Posted May 7, 2010 That looks very much like a wiring error. When there's loose wires or wires are swapped etc., almost everything can happen on the LCD as it'll receive only crap. Check all wiring again and make sure all wires are in the right place. If you don't see any error, maybe try out the lcd interconnection test app (from MIOS8 download page). Good luck S Quote Link to comment Share on other sites More sharing options...
Imp Posted May 8, 2010 Report Share Posted May 8, 2010 You schould have used a PIC18F4685 instead. Look Here Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.