Mounting buttons and LEDs to frontpanel

[banneduser]

Hi guys,

I finished with my first Midibox16 last week, and now I am planning something bigger:

I am going to use an old Video recorder as a case.

Now my questions:

- how can I mount the red buttons shown at the bottom of the midibox to the panel, the buttons should look like these:

The same question with the LEDs - how can I mount them WITHOUT using these LED holders:

It should look like the LEDs shown on Thorstens SID using the C64 case on the main site:

How are they mounted? Are there maybe pics from inside of the case?

Thanks in advance for your replies.

Regards,

--- Iwen ---

[Nat]

The leds can be either mounted on some vectorboard which is screwed to the panel or glued to the pannel with hot glue.

[TK.]

Here some pictures from MIDIbox LC which should help:

http://www.midibox.org/midibox_lc_photos/

I've also some pictures from my MIDIbox SID and will upload them tonight

Best Regards, Thorsten.

[banneduser]

Oh yes, thanks for the pics, that´s what i was looking for. Looks as if you used the same Reichelt buttons I want to use... ;-)