cosmosuave Posted March 14, 2011 Report Posted March 14, 2011 (edited) Been awhile since I've posted here but I have dug out my SIDbox (stereo) V 2.0RC17 and have it connected to my Machinedrum... So far I am able to trigger the SIDbox no problem with the MD but not having any luck assigning the MD controllers to the SIDbox... The pitchbend control works fine but if I want to assign the filter is resonance no luck.... Is this some kind of NRPN thing? Another thing I am using the minimal control service design with some extra buttons... Thanks for looking... Using the following midi cc chart... CC Chart of MIDIbox SID V2 --- Lead Engine ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ CC # | Hex | Description | Range | =====+=====+==============================================+=============+ 0 | 00h | Bank change | 0-7: bank | -----+-----+----------------------------------------------+-------------+ 1 | 01h | Knob #1 (Assignable Parameters) | 0-127: val | -----+-----+----------------------------------------------+-------------+ 2 | 02h | Oscillator Phase Offset | 0-127: val | 3 | 03h | Oscillator Detune | 0-127: val | -----+-----+----------------------------------------------+-------------+ 4 | 04h | Filter CutOff Frequency | 0-127: val | 5 | 05h | Filter Resonance | 0-127: val | Edited March 14, 2011 by cosmosuave Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.