SeqV4 card access +

[igi]

Hi!

I have two questions about SeqV4.054 (LPC core).

1. When I enabled MSD USB everything is OK, until I try change something

on the SD card.

When I do that then Seq. show: HARD FAULT at PC=0x0002fca0 and

seq. stop working. (sometimes computer too). I was try with different cards, but with

same results.

Is also the same if I start MSD from MIOS studio.

Everything is normal when use card directly in PC, and then in Seq.

I use PC with Windows XP.

2. I cant get sysex thru MBSeq.

MIDI MONITOR is shown input (sysex) normally , but on out port

is nothing. Is the same if I use USB or "normal" MIDI port.

I was try with different router settings, but no results.

Notes, CC ... working normally.

Did I miss something or this is normal?

Thanks in advance and Best Regards, IGI

[TK.]

Hi,

1. When I enabled MSD USB everything is OK, until I try change something

on the SD card.

When I do that then Seq. show: HARD FAULT at PC=0x0002fca0 and

seq. stop working. (sometimes computer too). I was try with different cards, but with

same results.

Is also the same if I start MSD from MIOS studio.

Everything is normal when use card directly in PC, and then in Seq.

I use PC with Windows XP.

Before I build up my old PC equipment in the cellar I would like to know, if this happens with the STM32 or LPC17 based core.

2. I cant get sysex thru MBSeq.

MIDI MONITOR is shown input (sysex) normally , but on out port

is nothing. Is the same if I use USB or "normal" MIDI port.

I was try with different router settings, but no results.

Notes, CC ... working normally.

Did I miss something or this is normal?

Of course, this isn't normal.

I checked this and found the reason (happens since a change in MIOS32 MIDI event handling)

SysEx forwarding will work properly again with the next version! :)

Best Regards, Thorsten.

[igi]

HI!

1. Outside from the question frame:

"I have two questions about SeqV4.054 (LPC core)."

YES I use LPC17core! :thumbsup:

2. OUf'''' I will be happier if I could do that !

Man!..............Thanks! and Best Regards!