igi Posted December 28, 2011 Report Share Posted December 28, 2011 Hi! I have two questions about SeqV4.054 (LPC core). 1. When I enabled MSD USB everything is OK, until I try change something on the SD card. When I do that then Seq. show: HARD FAULT at PC=0x0002fca0 and seq. stop working. (sometimes computer too). I was try with different cards, but with same results. Is also the same if I start MSD from MIOS studio. Everything is normal when use card directly in PC, and then in Seq. I use PC with Windows XP. 2. I cant get sysex thru MBSeq. MIDI MONITOR is shown input (sysex) normally , but on out port is nothing. Is the same if I use USB or "normal" MIDI port. I was try with different router settings, but no results. Notes, CC ... working normally. Did I miss something or this is normal? Thanks in advance and Best Regards, IGI Quote Link to comment Share on other sites More sharing options...
TK. Posted December 28, 2011 Report Share Posted December 28, 2011 Hi, 1. When I enabled MSD USB everything is OK, until I try change something on the SD card. When I do that then Seq. show: HARD FAULT at PC=0x0002fca0 and seq. stop working. (sometimes computer too). I was try with different cards, but with same results. Is also the same if I start MSD from MIOS studio. Everything is normal when use card directly in PC, and then in Seq. I use PC with Windows XP. Before I build up my old PC equipment in the cellar I would like to know, if this happens with the STM32 or LPC17 based core. 2. I cant get sysex thru MBSeq. MIDI MONITOR is shown input (sysex) normally , but on out port is nothing. Is the same if I use USB or "normal" MIDI port. I was try with different router settings, but no results. Notes, CC ... working normally. Did I miss something or this is normal? Of course, this isn't normal. I checked this and found the reason (happens since a change in MIOS32 MIDI event handling) SysEx forwarding will work properly again with the next version! :) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
igi Posted December 28, 2011 Author Report Share Posted December 28, 2011 HI! 1. Outside from the question frame: "I have two questions about SeqV4.054 (LPC core)." YES I use LPC17core! :thumbsup: 2. OUf'''' I will be happier if I could do that ! Man!..............Thanks! and Best Regards! Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.