meltac Posted January 6, 2012 Report Share Posted January 6, 2012 Hi everybody. The assembly of my MB-6582 base board comes nearly to an end. Yesterday (or better today early in the morning) i finished the PSU section (option B +5V, +9V, +12V). While testing the outputs on J4 i regognized that the 9V rail is on up to 13V and not 9V. The other rails measure the expected voltage. Now my question: Where could be the problem or is this the usual case? Best regards from Hamburg! Quote Link to comment Share on other sites More sharing options...
Shuriken Posted January 6, 2012 Report Share Posted January 6, 2012 (edited) Almost sounds as you somehow mixed up the 7812 and the 7809. Edited January 7, 2012 by Shuriken Quote Link to comment Share on other sites More sharing options...
meltac Posted January 7, 2012 Author Report Share Posted January 7, 2012 OK i solved the problem. The 7809 on V2 seemed to be defect. It released around 12.9xV. Although it is labelled as 7809CV. Replaced it with another one of the same model. Now i get around 9V. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.