How to connect an AINX4 to a LPC17 Core

[eddiemolko]

Hi,

First of all, sorry if my english is not so good, I'm from Argentina.

I was wondering how to connect a AINX4 to a LPC17 Core, since the LPC17 doesn't have a J6 connector, and the J5 connector is not the same as the one on the AINX4.

And how to connect more than one AINX4 to the core.

Thanks!

[TK.]

Hi,

the MBHP_AIN module isn't supported by MBHP_CORE_LPC17 due to the bad conversion quality of the internal ADC.

MBHP_AINSER64 will be the future solution:

Best Regards, Thorsten.