bibi Posted June 26, 2013 Report Share Posted June 26, 2013 Hello everybody Here's my problem: After changing from midio128 to midibox ng on my lpc17, I had the sysex issue message "error#14". But the midibox ng is working fine, except that each time I want to load a program it stops uploading it and error#14 comes on. Same thing for the bootloader So I have reloaded the bootloader with j27 pins connected, it worked Then I loaded the midibox application, it worked too After this, I decided to format my sdcard, just in case, and restart with a fresh, blank new card. I used the sdcard_format command. Now, mios studio says it can't load/create the .ngc, .ngl, etc... files, and when using the mios file browser the sd card is empty. I did it several times but I can't get the initial config files to be automaticly created. Any idea? Thanks for your care. Best regards. Bibi Quote Link to comment Share on other sites More sharing options...
bibi Posted June 26, 2013 Author Report Share Posted June 26, 2013 Well, it seems like connecting my lpc to mios studio on my mac fixed the problem, the default files were back on the sd card. Back to mios studio on windows xp, the files are back as well. Mios studio 2.4.5 installed on both mac and windows os bootloader version: mios32_bootloader_v1_012 midibox ng version : V1.026 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.