Problem with ain_mode=Snap

[dinama]

Hi.

I have some problem with ain_mode=Snap

this is a part of my configuration file

These are the pots configuration

EVENT_AINSER id= 57  type=PolyPressure      chn= 1 key= 71   range=  0:127 offset=0  ports=1000100000001000  ain_mode=Snap lcd_pos=1:1:1  label="CH RATE %3d"
EVENT_AINSER id= 58  type=PolyPressure      chn= 1 key= 72   range=  0:127 offset=0  ports=1000100000001000  ain_mode=Snap lcd_pos=1:1:1  label="CH PHASE %3d"
EVENT_AINSER id= 59  type=PolyPressure      chn= 1 key= 73   range=  0:127 offset=0  ports=1000100000001000  ain_mode=Snap lcd_pos=1:1:1  label="CH DEPTH %3d"
EVENT_AINSER id= 60  type=CC     chn= 1 cc= 91   range=  0:127 offset=0  ports=1000100000001000  ain_mode=Snap lcd_pos=1:1:1  label="CH DRYWET %3d"
EVENT_AINSER id= 61  type=CC     chn= 1 cc= 7     range=  0:127 offset=0  ports=1000100000001000  ain_mode=Snap lcd_pos=1:1:1  label="VOLUME %3d"

...

these are buttons for recall snapshots

.....

EVENT_BUTTON id= 1  fwd_id=LED:1 type=Meta meta=setSnapshot meta=LoadSnapshot  meta=DumpSnapshot  range=  1:1 radio_group=1 button_mode=OnOnly lcd_pos=1:1:1 label="%Cmem%S"
EVENT_BUTTON id= 2  fwd_id=LED:2 type=Meta meta=setSnapshot meta=LoadSnapshot  meta=DumpSnapshot  range=  2:2 radio_group=1 button_mode=OnOnly lcd_pos=1:1:1 label="%Cmem%S"
EVENT_BUTTON id= 3  fwd_id=LED:3 type=Meta meta=setSnapshot meta=LoadSnapshot  meta=DumpSnapshot  range=  3:3 radio_group=1 button_mode=OnOnly lcd_pos=1:1:1 label="%Cmem%S"
EVENT_BUTTON id= 4  fwd_id=LED:4 type=Meta meta=setSnapshot meta=LoadSnapshot  meta=DumpSnapshot  range=  4:4 radio_group=1 button_mode=OnOnly lcd_pos=1:1:1 label="%Cmem%S"

...

this is the button for save snapshot

 

EVENT_BUTTON id= 18 type=Meta meta=SaveSnapshot meta=DumpSnapshot  button_mode=OnOnly lcd_pos=1:17:1 label="%Csave mem%S"

 

 

when i move the pots of  of EVENT_AINSER events the output value jumps directly to the new conversion value ( like in Direct mode)

not like in Snap mode definition " whenever a new value is received from external, pot/fader movements won't generate MIDI events until it passed beyond the new position"

 

 

The strange thing is thant if i change the ain_mode from Snap to Relative all it's ok

 

I try to delete the .ngs file from sd card so that a new one will be created but i have the same problem.

thanks for help

[TK.]

Just to ensure before I start debugging: does this issue still exist?

 

Best Regards, Thorsten.

[dinama]

yes.

still exist

[TK.]

Alright, could you please try this version:

http://www.ucapps.de/mios32/midibox_ng_v1_027_pre2.zip

 

A snapshot now passes values like if they have been received from a MIDI IN.

I must admit, that I haven't tested this change - but I guess that you wanted to try out a quick solution ;)

 

Best Regards, Thorsten.

[dinama]

i tryed the new version

http://www.ucapps.de...v1_027_pre2.zip

ain_mode=Snap still not work