Marxon Posted December 18, 2013 Report Share Posted December 18, 2013 Hi all, unfortunately only matrix numbers from 1-7 are working. If i set a matrix as n=8 there is no reaction. Does anyone know what could be the reason? Best regards Marxon Quote Link to comment Share on other sites More sharing options...
TK. Posted December 18, 2013 Report Share Posted December 18, 2013 Hi Marxon, this was related to a (stupid) programming error. Could you please check if this version works better? -> http://www.ucapps.de/mios32/midibox_ng_v1_028_pre1.zip Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Marxon Posted December 18, 2013 Author Report Share Posted December 18, 2013 Hi Thorsten, Hi Marxon, this was related to a (stupid) programming error. Could you please check if this version works better? -> http://www.ucapps.de/mios32/midibox_ng_v1_028_pre1.zip Best Regards, Thorsten. do not be so hard on yourself. Yes with your pre release also matrix n=8 is working! Thank you! This leads me to another question: Is it possible to increase the maximum number of matrices from 8 to maybe 16? Marxon Quote Link to comment Share on other sites More sharing options...
TK. Posted December 18, 2013 Report Share Posted December 18, 2013 Ok, try this one: http://www.ucapps.de/mios32/midibox_ng_v1_028_pre2.zip I hope that the performance of other features isn't affected so much, but I guess that you won't notice this in your application anyhow. Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Marxon Posted December 18, 2013 Author Report Share Posted December 18, 2013 (edited) OK. Thanks again! I wait for some 595s which i ordered on monday, then i can test more than 8 matrices. For the performance issue: i already have a STM32F4 Module and will built it these days. Best regards Marxon Edited December 18, 2013 by Marxon Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.