Jump to content

Fluorescent inlay for engraving


audiomobster

Recommended Posts

I'm posting this, as I didn't find anything similar, just to share my experience.

 

I'm using fluorescent acrylic colours from Daler-Rowney for my engravings inlay. I stroke the colour from all four directions into the engravings with mixed results. After drying the colour I scratched away the rests with a fingernail and took some colour out of the engravings.

post-6624-0-91571200-1387925357_thumb.jp

 

Aceton works better as you can see on the backpanel.

post-6624-0-30633600-1387925399_thumb.jp

 

I'll apply the colour a second time then it should work.

 

 

Regards,

 

Uli

 

Final result, I filled the missing pieces with a bristle brush. This works much better than a hair brush. Then I removed the protruding colour with a credit card and cleaned everything with Aceton.

post-6624-0-74272300-1387990761_thumb.jp

 

 

post-6624-0-74272300-1387990761_thumb.jp

Edited by audiomobster
Link to comment
Share on other sites

  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...