alchemist Posted January 21, 2014 Report Share Posted January 21, 2014 (edited) Hello, I am almost at the end : I have no sound on the MBHP_SID except a small noise like "computer sound". I checked the connections with the interconnection app, and everything is OK (I had 3 pins not working and fixed them). I don't see a "next check if it fails" in the walktrough... what can I do now? I have a "plan B": since I will have a stereo setup, I will solder the second plate and test it. But plate #1 should also be fixed ;) Edited January 24, 2014 by alchemist Quote Link to comment Share on other sites More sharing options...
TK. Posted January 21, 2014 Report Share Posted January 21, 2014 Hi, are you sure that the SID chip itself is working? E.g. has it been tested on a C64? Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
alchemist Posted January 22, 2014 Author Report Share Posted January 22, 2014 The C64 where came the SID died in beginning of years '90 (this was the family's C64). It died by electric shock from an evil desk lamp. Thus yes, it can be defective. I will get an other C64 from a friend and test the SID on it, and test the other SID on the board. Quote Link to comment Share on other sites More sharing options...
alchemist Posted January 24, 2014 Author Report Share Posted January 24, 2014 Hello, I've ordered an other SID 6581 on eBay, and I get sound now ! So, my family's SID was dead. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.