Minty Posted July 1, 2014 Report Share Posted July 1, 2014 (edited) Hello all. Please be gently, I'm a MIDI noob. My current setup is that I have a Boss GT8 guitar effects processor that has MIDI control, and a Hughes & Kettner Tubemeister 36 amplifier which is MIDI controlled. I have this set up so that the GT8 changes the amplifer channel to whatever I need when I change the 'patch' on the GT8. I need one more device to complete my setup; Basically, I need to add another analogue effect into the chain when in one of two amplifier channels, and remove it from the chain in the third. So in effect, a simple effects loop switch. I have attached a simple drawing of my idea on the concept, I just need to know how to make the midi part work and what components are required. [Edit] - it appears that the file didn't attach, maybe I need more posts on the forum to do that? It can be found here: Thanks! Edited July 1, 2014 by Minty Quote Link to comment Share on other sites More sharing options...
TK. Posted July 1, 2014 Report Share Posted July 1, 2014 Today MIDIbox is probably not the best choice for such a project, because the platform is designed for much more complex use cases. This Arduino based project seems to fit for your purposes: http://forum.arduino.cc/index.php?topic=73418.0 Adding the MIDI OUT shouldn't be a big deal. Either via software based forwarding, or via hardware (MIDI Thru circuit) Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Minty Posted July 2, 2014 Author Report Share Posted July 2, 2014 Thank you Thorsten. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.