Use of Tutorial 5 with STM32F4

[robinfawell]

Having given up on using Windows 7 with MIOS STUDIO I have switched to a PC running LINUX (Mint).

 

MIOS STUDIO seems to work properly.

 

I have managed to download hex files using MIOS STUDIO, it would seem.  However I would like proceed slowly and looked for an application that I could use to check that the STM32F4 core is OK.

 

Tutorial 5 seemed to be the ideal candidate as it only needs shorting links to be applied to J5 connector.

 

I am not sure whether this APP is ready for STM32F4.  I get no response

 

Please let me know if this is the case and if not let me know if there is another application that would be suitable.

 

Or, whether I am likely to have a fault on the hardware.

 

Thanks Robin

 

[TK.]

Hi Robin,

 

Tutorial 005 is working at my side with a STM32F4 core.

It's important that you compile the application with the right MIOS32 toolchain release which is available under: http://www.midibox.org/mios32_toolchain/

 

Best Regards, Thorsten.