Velocity-Curve-Controller

[matthias]

Hello,

I'm absolute new to MIDIbox. Found this page while searching a solution for my problem:

I would like to build/program a device that should do only one thing: changing the velocity curve of my masterkeyboard, adjustable for every single key. I want to achieve a better feeling for playing digital piano. What I mean is: every "NOTE ON" event received should get a translated velocity-value and sent out via MIDI again.

My short question is:

- is MIDIbox the right (Hardware-)starting Point, will it have enough power to do this without producing to much delay ?

- which board should i choose ? I only need 2x MIDI in and 2x MIDI out (of course it can be more !)

 

Thank you,

Matthias

[ilmenator]

Yes, MIDIbox is the right platform for this type of application. You could either program this yourself from scratch, e.g. using a set of look-up tables, or base your application on the MB-NG framework. As hardware platform I would recommend the most recent core board, i.e. the STM32F4 based core.

[matthias]

Thank you,

I will try this.