Hello, Peter made an awesome video (4k quality!) demonstrating the assembly of the following modules
Euroceiver (line driver receiver in the rack), power distribution
A1 Expander (AOUT based on MAX5500)
D1 Expander (DOUTX1 for gates plus protection)
D2/D3 Expanders (likewise for clocks and triggers)
Feel free to use this thread for any discussion or troubleshooting. Have fun building your modules!
Hi Niels,
i'm using the same (cheap) DB-25 cable from Reichelt, about 1.5m long. It's also unshielded and you are right, it might pick up some noise, even a ground hum if you run it e.g. close to a transformer.
But: my expectation would be that while reducing the DB-25 cable length and upgrading to a better/shorter USB cable (e.g. with a ferrite ring) will help to battle the minor digital noise introduced by the PC, it will probably not he