lcd off

[Guest massi]

hi ,Im finishing now my midibox 64 with 1.0 firmware.

I still have unplugged all the faders and buttons couse when I switch on the core with twoo ainx ,the display is fine(shows the count up and version),but when I connect the dinx module without any button plugged,the display doesnt start at all.

is my dinx in short or what?

Thanks for the help

massi-newbie

Italy

[pay_c]

Welcome!!  :D

Yeah, should be that (Does the 7805 on the core get hot?). Measure the resistance between GND and 5V on your DIN to go sure.

[Guest massi]

Thanks for answering Pay_c :)

I ve tested all the +5 and ground pins on each module,but my problem is still there.

Maybe i should connect the 4 buttons for commands first.

Anyway the 5 volts are correct everywhere :(