Guest jimminy Posted February 26, 2004 Report Posted February 26, 2004 Can you do surface mounting with perf boards that have no copper pads?Anyone know anyplace in the states that sells them cheap?
Mickey_Sadler Posted February 27, 2004 Report Posted February 27, 2004 Hi All,Probably the best thing to do would be make a small PC board and mount the surface mount chip on it, then use it like an IC on the perfboard. See http://www.arrl.org/tis/info/surface.html for lots of information on using surface mount technology. The four part article titled Surface Mount Technology - You Can Work With It shows how to do the PC board by routing with Dremel tool. Kinda neat project.Mickey
Guest jimminy Posted February 27, 2004 Report Posted February 27, 2004 Actually, I meant PCB mount. As in to mounting buttons and components directly to pcb boards.I'm not quite ready for surface mount technology!Thanks
NorthernLightX Posted February 27, 2004 Report Posted February 27, 2004 Well, how are you going to keep them there without something to solder them to, if you want them without copper? Most parts don't exactly stay in 1 place, even if they have 'hooked legs'. My tactile switches for example have those legs, you can click them in, and they won't fall out. But as soon as you push them they move. not an option as far as i'm concerned...
arumblack Posted February 28, 2004 Report Posted February 28, 2004 @ Mickey: even though it's not what Jimminy was looking for, I'm glad you posted it ;)... good stuff!
Guest jimminy Posted February 29, 2004 Report Posted February 29, 2004 Guys, Thanks for the responses. After looking all over online for good prices on copper padded perf boards, I ended up finding them at Radio Shack! the best price by far, I couldn't believe it, I wasn't even looking for that. So if you are looking too, try RS cuz like they say: "if you've got questions, we've got...a confused look on our faces".It's all coming together. Cheers!
Mickey_Sadler Posted March 4, 2004 Report Posted March 4, 2004 Hi All,Arumblack, I'm glad the info was of interest.Jimminy, I've used a dab of RTV silicone to hold parts to perfboards, also lo temp hot glue and sometimes superglue. Pushbuttons, switches, etc. I usually mount through the perfboard same as through a panel i.e. drill a hole and use the mounting hardware on the switch. Makes for a better mechanicaly ridgid mount.Later,Mickey
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now