adamjking Posted June 21, 2004 Report Share Posted June 21, 2004 Hi All,I am building a Midibox that uses pots and encoders, and following Thorsten's advice am using the Midibox64e application. I am wondering if there is a way to set the pot modes (normal/snap/parallax) for the 64e like you can with the standard Midibox64?Cheers. Quote Link to comment Share on other sites More sharing options...
goyousalukis Posted June 21, 2004 Report Share Posted June 21, 2004 Meeska, I am curious why you want both pots and encoders? The midibox 64e is designed for encoders, so I believe you'd have to modify it if you want pots. In my opinion encoders are much better than pots - you don't have to worry about the different modes, since they won't reset your values when you switch to a different layer. What is the intended purpose of the midibox, what are you going to control?Justin Quote Link to comment Share on other sites More sharing options...
adamjking Posted June 21, 2004 Author Report Share Posted June 21, 2004 Justin,I am building a dj-mixer type controller. I need pots for the faders (is there an encoder equivilent for sliding pots??) and the eq knobs (finding cheap encoders in Australia is also very hard - pots can be had for $0.50 each). I need the encoders for jog wheels.Thorsten recommended building a 64e for people who want to mix pots and encoders.Cheers. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.