Fx3_hdrive Posted July 6, 2004 Report Share Posted July 6, 2004 hii have notices on a JMD module page that the socket used is not male:i have a serial cable that has two females on the ends, this cable does not fit to the socket on the JMD. i thought to use a Null-modem cable? but i dont have it. i heard that the pins on it twist. can i just replace a socket on the JMD that fits my cable?thankx in reserve.Yarek T. Quote Link to comment Share on other sites More sharing options...
adamjking Posted July 7, 2004 Report Share Posted July 7, 2004 Hi,I would just get a straight through serial cable and use it with a female connector on the JDM. When I first built my JDM, I too had a cable with two female ends and thought I could use a male connector on the JDM. But it was a null modem cable and the pins are indeed twisted. Avoid the possibiltiy for confusion and just get a new serial cable. Quote Link to comment Share on other sites More sharing options...
titan Posted July 7, 2004 Report Share Posted July 7, 2004 Don't use a null modem cable , but change just the socket on your programmer to a male one, i did it and it work without problems! ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.