Pearl Posted July 13, 2004 Report Posted July 13, 2004 Hi there ...Because I didn't find a way to control the MasterVolumen in CubaseSX-GenericRemote, I want to try to integrate an encoder in my MidiboxLC to control the LC-MasterVolumen (usually controlled by one Motorfader).Is there an easy way (means some additional code in "enc.inc") or is this more complicated ?"No Touchsensitiv" is not a problem for me.Thanx for any ideas ...Bye Pearl Quote
TK. Posted July 14, 2004 Report Posted July 14, 2004 Hi Pearl,the encoder just only has to send PitchBender events at Channel 9Best Regards, Thorsten. Quote
Pearl Posted July 15, 2004 Author Report Posted July 15, 2004 Hi TK ...Cool, Iwill try to integrate this in the next days :)Bye Pearl Quote
Pearl Posted July 29, 2004 Author Report Posted July 29, 2004 Hi everybody ...Here is my solution for handling masterfader-event with an encoder. I hope that I got all the changes ;) .Change in lc_mproc.inc: ... ;; -------------------------------------------------------------------------- ;; Ex has been received: move motorfader ;; -------------------------------------------------------------------------- LC_MPROC_Received_Ex ;; mask out MIDI channel (== fader number) movlw 0x0f andwf MIOS_PARAMETER1, F #if MOTORFADER0_IS_MASTERFADER == 0 ;; do nothing if fader number >= 8 movlw 0x09 ;including "MasterfaderEvent" this has to be 0x09 !!! IFGEQ MIOS_PARAMETER1, ACCESS, return #else ;; exit if fader number == 0 ; movf MIOS_PARAMETER1, W ; skpnz ; return ;; do nothing if fader number >= 9 movlw 0x09 IFGEQ MIOS_PARAMETER1, ACCESS, return ;; master fader 8 -> 0 movlw 0x07 andwf MIOS_PARAMETER1, F #endif ;; move fader movf MIOS_PARAMETER1, W goto LC_MF_FaderMove ; (located in lc_mf.inc) ... Change in lc_mf.inc: ... ;; -------------------------------------------------------------------------- ;; This function is called by LC_MPROC_Received_Ex when a fader should ;; be moved ;; Input: ;; o fader number in WREG and MIOS_PARAMETER1 ;; o LSB value in MIOS_PARAMETER2 ;; o MSB value in MIOS_PARAMETER3 ;; -------------------------------------------------------------------------- LC_MF_FaderMove ;; save fader number in LC_FADER_NUMBER andlw 0x07 movwf LC_FADER_NUMBER ;; LSB = MSB[0] | MIDI LSB btfsc MIOS_PARAMETER3, 0 bsf MIOS_PARAMETER2, 7 ;; MSB = MIDI MSB >> 1 clrc rrf MIOS_PARAMETER3, F ;; 10-bit value = 14-bit value >> 4 clrc rrf MIOS_PARAMETER3, F ; 1 rrf MIOS_PARAMETER2, F clrc rrf MIOS_PARAMETER3, F ; 2 rrf MIOS_PARAMETER2, F clrc rrf MIOS_PARAMETER3, F ; 3 rrf MIOS_PARAMETER2, F clrc rrf MIOS_PARAMETER3, F ; 4 rrf MIOS_PARAMETER2, F ;; check if fader is masterfader movlw 0x07 IFLEQ MIOS_PARAMETER1, ACCESS, goto LC_FADER_MOVE ; branch if fader is not masterfader ;; store 10-bit result in LC_MFADER_POS_[LH] if fader is masterfader and return movff MIOS_PARAMETER2, LC_MFADER_POS_L ; MIDI LSB -> LC_MFADER_POS_L movff MIOS_PARAMETER3, LC_MFADER_POS_H ; MIDI MSB -> LC_MFADER_POS_H return LC_FADER_MOVE ;; store 10-bit result in LC_FADER_POS_[LH] movff MIOS_PARAMETER2, LC_FADER_POS_L ; MIDI LSB -> LC_FADER_POS_L movff MIOS_PARAMETER3, LC_FADER_POS_H ; MIDI MSB -> LC_FADER_POS_H ;; finally move fader movff LC_FADER_POS_L, MIOS_PARAMETER1 movff LC_FADER_POS_H, MIOS_PARAMETER2 movf LC_FADER_NUMBER, W goto MIOS_MF_FaderMove Change in lc_enc.inc: (in my setup last encoder No.28 is for masterfader-event) ... ;; -------------------------------------------------------------------------- ;; This function is called by MIOS when an encoder has been moved ;; Input: ;; o Encoder number in WREG and MIOS_PARAMETER1 ;; o signed incrementer value in MIOS_PARAMETER2: ;; - is positive when encoder has been turned clockwise ;; - is negative when encoder has been turned counter clockwise ;; -------------------------------------------------------------------------- USER_ENC_NotifyChange ;; if encoder number within 0 and 7, send a V-pot event movlw 0x07 IFLEQ MIOS_PARAMETER1, ACCESS, goto LC_ENC_SendVPot ;; send generic cubase "MasterVolumen" event movlw 0x08 IFGEQ MIOS_PARAMETER1, ACCESS, goto LC_ENC_SendMasterVolumen ;; send generic cubase"relative" event movlw 0x1c IFNEQ MIOS_PARAMETER1, ACCESS, goto LC_ENC_SendCubaseRemote ;in my setup some encoders control cubase-generic-remote ;; else do nothing return ... !! You have to modify the branches to your design !! ...and add following lines: ... ;; -------------------------------------------------------------------------- ;; This function is called by MIOS when encoder sends "mastervolume" ;; Input: ;; o signed incrementer value in MIOS_PARAMETER2: ;; - is positive when encoder has been turned clockwise ;; - is negative when encoder has been turned counter clockwise ;; -------------------------------------------------------------------------- LC_ENC_SendMasterVolumen ; ----------------------------------------------------- ;; save incrementer in LC_MFADER_LAST_INC movff MIOS_PARAMETER2, LC_MFADER_LAST_INC ;; now we have to add (or subtract) the incrementer from the absolute value, ;; which has been stored in LC_MFADER_POS_L ;; the simplest solution is the use of MIOS_HLP_16bitAddSaturate, which ;; can handle with values up to 16 bit!!! :-) ;; please refer to the function documentation for the input/output parameters! ;; set pointer to LC_MFADER_POS_L ;; (it is located to an even address, thats important when this function is used!) ;; (and since we are modifying a 16-bit value, the next address to the low-byte ;; is used as high-byte -> see app_defines.h) lfsr FSR1, LC_MFADER_POS_L ;; set max value movlw 0xff ; low-byte of max value movwf MIOS_PARAMETER1 movlw 0x03 ; high-byte of max value movwf MIOS_PARAMETER2 ;; get incrementer (which has been stored in LC_MFADER_LAST_INC) movf LC_MFADER_LAST_INC, W ;; call routine call MIOS_HLP_16bitAddSaturate ;; now [FSR1] = INDF1 = LC_MFADER_POS_L contains the result ;; MIOS_PARAMETER1[0] is set when value has been changed ;; exit routine if value has not been changed IFCLR MIOS_PARAMETER1, 0, return ;----------------------------------------------------------- movf LC_MFADER_POS_L, W movwf LC_FADER_POS_L movf LC_MFADER_POS_H, W movwf LC_FADER_POS_H ;; 10 bit -> 14 bit (LC_MFADER_POS_[LH] << 4) clrc rlf LC_FADER_POS_L, F ; 1 rlf LC_FADER_POS_H, F rlf LC_FADER_POS_L, F ; 2 rlf LC_FADER_POS_H, F rlf LC_FADER_POS_L, F ; 3 rlf LC_FADER_POS_H, F rlf LC_FADER_POS_L, F ; 4 rlf LC_FADER_POS_H, F ;; MIDI MSB: (LC_FADER_POS_H << 1) | LC_FADER_POS_L[7] clrc rlf LC_FADER_POS_H, W IFSET LC_FADER_POS_L, 7, iorlw 0x01 movwf LC_FADER_POS_H ;; MIDI LSB: LC_FADER_POS_L & 0x7f movlw 0x7f andwf LC_FADER_POS_L, F ;; for MIDIbox Link: notify begin of stream call MIOS_MIDI_BeginStream ;; finally send value: E8 LSB MSB for masterfader movlw 0xe8 call MIOS_MIDI_TxBufferPut movf LC_FADER_POS_L, W call MIOS_MIDI_TxBufferPut movf LC_FADER_POS_H, W call MIOS_MIDI_TxBufferPut ;; for MIDIbox Link: notify end of stream call MIOS_MIDI_EndStream return Add in app_defines.h : ... ;; masterfader value for encoder LC_MFADER_POS_L EQU 0x030 ; received and transmitted low byte of fader position; low byte of 16-bit absolute value, address must be even!!! LC_MFADER_POS_H EQU 0x031 ; received and transmitted high byte of fader position; high byte of 16-bit absolute value, address must be odd!!! LC_MFADER_SPEED EQU 0x032 ; the speed setting, selected by Inc/Dec button LC_MFADER_LAST_INC EQU 0x033 ; last incrementer ... Add at the end of lc_init.inc : ... ;; set speed for encoder "masterfader" to "fast", speed exponent value is 3 movlw 0x03 ; speed exponent movwf MIOS_PARAMETER2 movlw MIOS_ENC_SPEED_FAST ; fast speed mode movwf MIOS_PARAMETER1 movlw 0x1c ; in my setup encoder number 28 is masterfader call MIOS_ENC_SpeedSet return ;; <------------------------------------------------------> ... Have fun ;DPearl Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.