how to connect the 4 bridges on the DINX ?

[banneduser]

Hi,

i don't quite understand how to solder the 4 bridges on the DINX module.

It says I have to solder the 4 bridges between  Pin 15 of the IC's and the Vss (ground) at the bottom side.

see picture:

http://www.ucapps.de/mbhp/mbhp_din_2.jpg

but how do I mount the IC-holder after making these bridges? Cause the hole in the pcb across Pin15 will be filled by the bridge.

Do I have to mount the IC-holder first and then solder the bridge to the IC-holder?

I don't have any solder experience, so don't shoot me ;)

cheers,

Bjorn

[banneduser]

Hi,

i don't quite understand how to solder the 4 bridges on the DINX module.

It says I have to solder the 4 bridges between  Pin 15 of the IC's and the Vss (ground) at the bottom side.

see picture:

http://www.ucapps.de/mbhp/mbhp_din_2.jpg

but how do I mount the IC-holder after making these bridges? Cause the hole in the pcb across Pin15 will be filled by the bridge.

Do I have to mount the IC-holder first and then solder the bridge to the IC-holder?

I don't have any solder experience, so don't shoot me ;)

cheers,

Bjorn

[LO]

Hi

just solder the Sockets first then solder the bridge to the end of the pin sticking through the PCB

Hope this makes sence

LO

[LO]

Hi

just solder the Sockets first then solder the bridge to the end of the pin sticking through the PCB

Hope this makes sence

LO

[banneduser]

thanks!

[banneduser]

thanks!