LED Rings up to 16 LEDs???

[Guest bolotov]

Ich habe LED Ring eingestellt, aber leider leuchten nur 11 LEDs, wie kann ich 16 LED kriegen?

[Guest bolotov]

Ich habe LED Ring eingestellt, aber leider leuchten nur 11 LEDs, wie kann ich 16 LED kriegen?

[TK.]

Auch die LED-Pattern kann man im midibox16e.ini File anpassen (siehe

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=german;action=display;num=1039009816

)

[LED_PATTERNS]
   0.00 = 0000000000000001
   0.01 = 0000000000000001
   0.02 = 0000000000000011
   0.03 = 0000000000000011
   0.04 = 0000000000000011
   0.05 = 0000000000000111
   0.06 = 0000000000000111
   0.07 = 0000000000000111
   0.08 = 0000000000001111
   0.09 = 0000000000001111
   0.0A = 0000000000001111
   0.0B = 0000000000011111
   0.0C = 0000000000011111
   0.0D = 0000000000011111
   0.0E = 0000000000111111
   0.0F = 0000000000111111
   0.10 = 0000000000111111
   0.11 = 0000000000111111
   0.12 = 0000000001111111
   0.13 = 0000000001111111
   0.14 = 0000000001111111
   0.15 = 0000000011111111
   0.16 = 0000000011111111
   0.17 = 0000000011111111
   0.18 = 0000000111111111
   0.19 = 0000000111111111
   0.1A = 0000000111111111
   0.1B = 0000001111111111
   0.1C = 0000001111111111
   0.1D = 0000001111111111
   0.1E = 0000011111111111
   0.1F = 0000011111111111

umaendern in:

[LED_PATTERNS]
   0.00 = 0000000000000001
   0.01 = 0000000000000001
   0.02 = 0000000000000011
   0.03 = 0000000000000011
   0.04 = 0000000000000111
   0.05 = 0000000000000111
   0.06 = 0000000000001111
   0.07 = 0000000000001111
   0.08 = 0000000000011111
   0.09 = 0000000000011111
   0.0A = 0000000000111111
   0.0B = 0000000000111111
   0.0C = 0000000001111111
   0.0D = 0000000001111111
   0.0E = 0000000011111111
   0.0F = 0000000011111111
   0.10 = 0000000111111111
   0.11 = 0000000111111111
   0.12 = 0000001111111111
   0.13 = 0000001111111111
   0.14 = 0000011111111111
   0.15 = 0000011111111111
   0.16 = 0000111111111111
   0.17 = 0000111111111111
   0.18 = 0001111111111111
   0.19 = 0001111111111111
   0.1A = 0011111111111111
   0.1B = 0011111111111111
   0.1C = 0111111111111111
   0.1D = 0111111111111111
   0.1E = 1111111111111111
   0.1F = 1111111111111111

Insgesamt kannst Du vier verschiedene Patterns definieren und den Encodern zuweisen... viel Spass beim "Malen nach/mit Zahlen" ;-)

Gruss,

       Thorsten.

[TK.]

Auch die LED-Pattern kann man im midibox16e.ini File anpassen (siehe

http://www.midibox.org/cgi-bin/yabb/YaBB.cgi?board=german;action=display;num=1039009816

)

[LED_PATTERNS]
   0.00 = 0000000000000001
   0.01 = 0000000000000001
   0.02 = 0000000000000011
   0.03 = 0000000000000011
   0.04 = 0000000000000011
   0.05 = 0000000000000111
   0.06 = 0000000000000111
   0.07 = 0000000000000111
   0.08 = 0000000000001111
   0.09 = 0000000000001111
   0.0A = 0000000000001111
   0.0B = 0000000000011111
   0.0C = 0000000000011111
   0.0D = 0000000000011111
   0.0E = 0000000000111111
   0.0F = 0000000000111111
   0.10 = 0000000000111111
   0.11 = 0000000000111111
   0.12 = 0000000001111111
   0.13 = 0000000001111111
   0.14 = 0000000001111111
   0.15 = 0000000011111111
   0.16 = 0000000011111111
   0.17 = 0000000011111111
   0.18 = 0000000111111111
   0.19 = 0000000111111111
   0.1A = 0000000111111111
   0.1B = 0000001111111111
   0.1C = 0000001111111111
   0.1D = 0000001111111111
   0.1E = 0000011111111111
   0.1F = 0000011111111111

umaendern in:

[LED_PATTERNS]
   0.00 = 0000000000000001
   0.01 = 0000000000000001
   0.02 = 0000000000000011
   0.03 = 0000000000000011
   0.04 = 0000000000000111
   0.05 = 0000000000000111
   0.06 = 0000000000001111
   0.07 = 0000000000001111
   0.08 = 0000000000011111
   0.09 = 0000000000011111
   0.0A = 0000000000111111
   0.0B = 0000000000111111
   0.0C = 0000000001111111
   0.0D = 0000000001111111
   0.0E = 0000000011111111
   0.0F = 0000000011111111
   0.10 = 0000000111111111
   0.11 = 0000000111111111
   0.12 = 0000001111111111
   0.13 = 0000001111111111
   0.14 = 0000011111111111
   0.15 = 0000011111111111
   0.16 = 0000111111111111
   0.17 = 0000111111111111
   0.18 = 0001111111111111
   0.19 = 0001111111111111
   0.1A = 0011111111111111
   0.1B = 0011111111111111
   0.1C = 0111111111111111
   0.1D = 0111111111111111
   0.1E = 1111111111111111
   0.1F = 1111111111111111

Insgesamt kannst Du vier verschiedene Patterns definieren und den Encodern zuweisen... viel Spass beim "Malen nach/mit Zahlen" ;-)

Gruss,

       Thorsten.