Looking for frontpanel for SEQ in Heidenreich case

[verpeiler]

Hello fellow MIDIboxers,

as I was out of the DIY stuff during the last years, I completely lost track.

Now I want to finish my SEQ. I have a Heidenreich case laying around as well as a MBHP_CORE_LPC17 v1.0, the CS board from Wilba (the blue one, no revision printed on the board, just the year 2009) and also a MBHP_AOUT_NG R1 (but I don't think that it will fit into the case).

To continue I need a frontpanel (and probably the backpanel). Could someone of you point me to the .fpd-files, please?

Thanks a lot in advance!

Edited August 21, 2024 by verpeiler
typo in subject

[forestcaver]

Just a thought - I used jlcpcb to make front panels from 2mm aluminium pcb - about $29 for 5 panels (I used two 1.6mm thick parts for a front panel in order to make it more rigid so $12 for a panel). I’m really happy with it given the cost.... (mine were for 19 inch rack)

[verpeiler]

Thank's for the tip!

What I'm looking for is either the fpd file which fits the Heidenreich case or maybe a ready made panel. The fpd file I found in the Wiki seems to be not specifically made for the Heidenreich case. I prever a fpd file which is proven to fit into the Heidenreich case before trying to adapt Wilbas files to the case.