Core

[Guest T0rnad0]

Hi everyone,

I'd like to make my own core for midibox*16E

-I don't need no display

-no analog potentiometers

do I leave the pins of the pic I don't need just open, or

do I have to connect them to Ground?

Thanks for your help

with best regards, Zeno

[Guest T0rnad0]

Hi everyone,

I'd like to make my own core for midibox*16E

-I don't need no display

-no analog potentiometers

do I leave the pins of the pic I don't need just open, or

do I have to connect them to Ground?

Thanks for your help

with best regards, Zeno

[TK.]

Hi Zeno,

the MIDIbox16E firmware doesn't support analog pots, therefore the analog pins don't have to be tied to ground. For the display only output pins are used - just let them open. Just only the 10k pull-up resistors at the digital inputs (Port J6 and J9) are a must.

Best Regards, Thorsten.

[TK.]

Hi Zeno,

the MIDIbox16E firmware doesn't support analog pots, therefore the analog pins don't have to be tied to ground. For the display only output pins are used - just let them open. Just only the 10k pull-up resistors at the digital inputs (Port J6 and J9) are a must.

Best Regards, Thorsten.