Programming a pic 16F84

[defred]

Hi there I'm currently trying to build a Midiclock to Analog clock device found here http://www.angelfire.com/geek/srlabs/diner.html

My question is, Can I use the Jdm module to program this pic, there's a huge physical difference beetween the PIC18F452 and this one, but maybe I just need to adapt the socket for the 16F84, or route the important pins to the new one.

Any infos welcome

deFred

[moebius]

Hi,

MBHP_JDM is just an adaptation of a original JDM programmer: http://www.jdm.homepage.dk/newpic.htm

Get a 18pin "machine pin" ic socket (these are harder to break ;)), compare the original JDM schematics and MBHP_JDM one - all the signals needed to program 16F84 can be taken from the socket of a MPHP_JDM.

So, use jumper wires to connect 18pin socket like in original schematics and leave some wires longer - to be plugged into MBHP_JDM.. (some additional wiring stuff is included for serial EEPROMs, but I'm no expert and don't know what to leave out..)

Bye, Moebius