krumelur Posted February 17, 2005 Report Share Posted February 17, 2005 Hello peeps! Im working on a midibox64. I made all the pcbs and everything, ordered all the parts and went to work. It turned out however that the pin-headers I got were slightly smaller than needed, resulting in a mismatch with the holes in the board. Quite a bummer!I ordered them from Elfa, which is the biggest retail store in Sweden for electronic components.Here are the product codes for the mismatched pin-headers:"Stiftlist 2,0mm rak 1*40p".............43-701-02"Stiflist 2,0mm rak 2*40p"..............43-701-10"Hylslist 2,0mm rak 1*40p.............43-701-51"Hylslist 2,0mm rak 2*40p.............43-701-77I suppose this has to do with metric vs...er... that other system.So, any swedish people beware!All other parts worked fine though. Quote Link to comment Share on other sites More sharing options...
d2k Posted February 17, 2005 Report Share Posted February 17, 2005 We're on a 2.54mm (standard) grid here with the layouts on ucapps so them would be the size headers u want...2.00mm is indeed to small ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.