squid Posted March 13, 2005 Report Share Posted March 13, 2005 !!!!!!!!   I pressed tab and my post was accidently posted.....To begin again: can anyone advise me on the minimum number of parts i wouldneed for the following midibox design?6 pots, 16 buttons, no lcd display, no banksticks.what software options would i need? Midibox64?Has anyone built such a meagre box???Thank you. Quote Link to comment Share on other sites More sharing options...
TK. Posted March 13, 2005 Report Share Posted March 13, 2005 one core, one DINX4 module (alternatively built on a breadboard: only 2 * 74HC165), MB64 application with multiplexer disabled:; Number of connected pots; Allowed values: 1-64#define DEFAULT_NUMBER_POTS 6 ; number of connected pots;; Multiplexers (AINX4 modules) connected? -> set this value to 1; No multiplexer connected= -> set this value to 0, allowed number of pots in this case: 1-8#define DEFAULT_MUX_ENABLED 0 ; disable AIN multiplexers[/code]Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
squid Posted March 14, 2005 Author Report Share Posted March 14, 2005 Than you very much Thorsten. I had scanned through all the relevent asm files to see just what the minimun was i couldget away with, but got stuck on the DIN board.... i assumed that the board had to be filled with at least 4 (74HC165) shift regs, but now i know better.But what about the disabled AIN multiplexers..............................How do i connect 6 or 8 pots to the core without a mux?? what am i not seeing here??I shall go back to the job and have a good think. Very best regards and thanks again for your speedy attention.Squid. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.