jasper81 Posted January 26, 2003 Report Posted January 26, 2003 Hi all,I've heard of the midibox quite a long time ago and back then read all about it and found it very interresting...but haven't decided to build one up until now...But okay there's one issue I haven't been able to figure out..I did look for it in this forum and the site...but ofcourse I can have over looked it someplace... but okay here it isIs it possible to have the midibox ( talking bout the midibox64) send it's events over different channels? so e.g. pot 1-30 on channel 2 and 31 on channel 10 etc. ??or maybe in a simpler way have the whole midibox transmit it's data on midi channel 2?I hope someone can tell me this...Thnx alotJasper
Dimitris_FX_freak Posted January 27, 2003 Report Posted January 27, 2003 First of all welcome to forumThe midibox 64 supports up to 16 bamks to be saved in an eprom. In each bank you can assing deferent cc for one or more channels so the answer is yes .Best Regards and good luck to your first midibox
jasper81 Posted January 27, 2003 Author Report Posted January 27, 2003 Great..:) thank you for the quick reply..and ofcourse the answer..
snorkman Posted February 18, 2007 Report Posted February 18, 2007 well hello everyone, i am also interested on midi channel.i am building my mb64 with 4 channels and EQ like a mixer, and i would like to know if i can assign ths four channels to another four when so i press a button to change the assigment. can manipulate another 4 channels besides the other 4 I was using previously?? and then press another button to move to the original 4?regardsMilton
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now