fario Posted September 17, 2005 Report Share Posted September 17, 2005 Hello at last I have ended up I all my first mdibox64 v2.4, configuration comes from LCD 4X20, 32 pots, 8 faders, 56 buttons, 56 leds and 4 encoders alps 24 p detented connected in my second din module ( sr8 ).The encoder work like double push buttons, I need to increment and decrement the value of a midi CC,( like a pot )my knowledge of English language is too small and I think that I have not understood how to configure encodersI have modified the mios_tables.inc file ,only the lines like show you get down , the rest of the file is the same as the originalI thank your help.Apologizing my error when inserting this post at the section latest newsGreetingsMIOS_MPROC_EVENT_TABLE  ;; entry 0x00-0x0f  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  ;; entry 0x10-0x1f    MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_EOT           MT_EOT  MT_EOT  MT_EOT  MT_EOT  MT_ENTRY 0xb0, 0x1b  MT_ENTRY 0xb0, 0x1c  MT_ENTRY 0xb0, 0x1d  MT_ENTRY 0xb0, 0x1e  MT_ENTRY 0xb0, 0x1f         ....................................................MIOS_ENC_PIN_TABLE  ;; encoders 1-16  ;;    SR Pin Mode  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT           ENC_EOT  ENC_EOT  ;; encoders 17-32  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT  ENC_EOT           ENC_ENTRY 8, 0, MIOS_ENC_MODE_DETENTED2  ; V-Pot 29  ENC_ENTRY 8, 2, MIOS_ENC_MODE_DETENTED2  ; V-Pot 30  ENC_ENTRY 8, 4, MIOS_ENC_MODE_DETENTED2  ; V-Pot 31  ENC_ENTRY 8, 6, MIOS_ENC_MODE_DETENTED2  ; V-Pot 32    Quote Link to comment Share on other sites More sharing options...
pay_c Posted September 17, 2005 Report Share Posted September 17, 2005 I think it could be a prob with the EOT message. It´s also stated in the .asm file: When MIOS is reading the *first* EOT message, it won´t search anymore for the correct entry. So all your needed entries should fill up the first lines of the table and the rest then should be filled with EOT messages. Not sure about that, but could be... *pushingthumbs* Quote Link to comment Share on other sites More sharing options...
fario Posted September 17, 2005 Author Report Share Posted September 17, 2005 ok .i will try this afternoontanks in avance Quote Link to comment Share on other sites More sharing options...
fario Posted September 17, 2005 Author Report Share Posted September 17, 2005 the encoder's behavior has changed after modifying the file.Turning clockwise send data even pins, turning counterclockwise send data odd pins.That's right?how configure the events to increment and decrement the value of CC.¿It is possible to increase in 2 ,4 ,8 ...each step ?tanks Quote Link to comment Share on other sites More sharing options...
pay_c Posted September 18, 2005 Report Share Posted September 18, 2005 I don´t know if that´s normal, but if you want to do CC changes with the Encoders you should use MB64E firmware and not MB64. MB64 is thought to work only with pots as MB64E works with pots & Encoders. Check it on UCApps.de for more info: http://www.ucapps.de/midibox16e.html Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.