toxictv101 Posted April 11, 2006 Report Posted April 11, 2006 hi all,i m making a Midibox Sid, but i can't find the solutionto my problem with the din modul,when i push a button and let it pressed downthe menu go every where in a random way.i verify all contact wire and solder but can't find where the prob is from.maby if anybody had the same prob, or can say me what it can be :)i would be very happy... Quote
VilladonEnt Posted April 11, 2006 Report Posted April 11, 2006 Hi,I had a similar problem because by buttons were connected to SR1 of the DIN, which I believe are used for menu navigation.You may want to try to connect to another Shift Register and see what happens.Hope this helps.Villadon. Quote
toxictv101 Posted April 18, 2006 Author Report Posted April 18, 2006 re,i find the reason of the troubleA pin of the IC PIC was Breaked, the RC one (rd2 on pic)... It s better When this PIn is connect To the DIN :-\ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.