I don't know if I have the right to ask this

[Guest ShagWill]

Hi !

I wonder if I have the right to ask this... but I wonder if some people here are able to build the enclosure and the PCB and then sell them ?

I could do the whole project myself... but I would like to have a professional looking control surface with good quality hardware and PCB... IOH, I don't want to spend all my money on something like a Mackie surface control.

Also, I live in Canada... so if anyone of you can do it please drop me a mail at wsimard@yahoo.com.

If this is not allowed on this board, please simply delete my message :)

William

[Ian_Hurlock]

Hi

You can get the boards and all the components complete from I think Chris's shop which is on the site here somewhere.

Ok I found it  

http://www.mikes-elektronikseite.de/midiseite.htm

You can get all the goodies there.

With regard to the box.

If you want a nice box then draw it and get the holes laser cut and then panel folded at a metal shop.

Do you know someone who can draw with CAD /CadKEY.

They can output a dxf file for this.

I would offer to draw your panel ( for no charge ) but components are very different due to availability in different countries.

It does'nt take a whole lot to put together a real nice job. ;)

There a plenty of peeps on here that will point you in the right direction.

All the best

Ian

[d2k]

This company in Germany will laser cut the panel for you, they even have software on they're site (http://www.schaeffer-apparatebau.de/) to design the panel, which also shows you the cost as you design...you then just send em the file and a cpl of weeks later (I'm told) you get a nice shiny laser cut panel ;p

Good Luck!

[DrBunsen]

If you look in a local electronic hobbyist magazine, you will most likely find ads from people willing to build the boards for you.