Jump to content

Programming two cores while linked


Recommended Posts

Hello,

since I didn't manage to program two cores in a MIDI Link

(ID 0 and 1, one forwarding point, one endpoint) while they

are linked, I disconnected them, set them to "enabled" mode,

replaced the application, and at the end activated the linked

mode using mk_syx, then reconnected.

Do you think there is a way to program them while they

are linked? This would avoid to open the device each time.

Thank you.

Ralf

Link to comment
Share on other sites

Hi Ralf,

with MIOS Studio you can execute MIOS functions - which means, it is possible to enable the normal MIDI merger mode by calling MIOS_MIDI_MergerSet(1) from the debug window. You have to do this for both cores (device ID 00 and 01)

Btw.: the problem with the flickering LED matrix when debouncing is enabled is fixed now (-> MIOS V1.9c) :)

Best Regards, Thorsten.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...