Melonenmonster Posted August 26, 2006 Report Share Posted August 26, 2006 Hello,since I didn't manage to program two cores in a MIDI Link (ID 0 and 1, one forwarding point, one endpoint) while theyare linked, I disconnected them, set them to "enabled" mode,replaced the application, and at the end activated the linkedmode using mk_syx, then reconnected.Do you think there is a way to program them while theyare linked? This would avoid to open the device each time.Thank you.Ralf Quote Link to comment Share on other sites More sharing options...
TK. Posted August 27, 2006 Report Share Posted August 27, 2006 Hi Ralf,with MIOS Studio you can execute MIOS functions - which means, it is possible to enable the normal MIDI merger mode by calling MIOS_MIDI_MergerSet(1) from the debug window. You have to do this for both cores (device ID 00 and 01)Btw.: the problem with the flickering LED matrix when debouncing is enabled is fixed now (-> MIOS V1.9c) :)Best Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
Melonenmonster Posted August 27, 2006 Author Report Share Posted August 27, 2006 Thank you and, thank you!Ralf Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.