toneburst Posted October 5, 2006 Report Posted October 5, 2006 Hiya,what's the best way to connect power from an optimised PSU to the MBSid board (mine is the SmashTV version)? I ask because the connection diagram says the 5V power from the PSU should be connected to 2 pins of J2. Does this preclude using a ribbon-cable to connect the Core and Sid modules? Is it better to use seperate wires, maybe heat-shrinked together? Any thoughts, anyone?Alexhttp://www.toneburst.net Quote
modularkomplex Posted October 5, 2006 Report Posted October 5, 2006 Hi Alex,Im using a paired wire with 0.14mm2 with crimp-connectors on both ends, works fine. Picture is from Reichelt showing the 3-pole version.Mike Quote
toneburst Posted October 6, 2006 Author Report Posted October 6, 2006 That looks like a good plan. I'm going to get myself a crimping tool and make up my own, I think.Alexhttp://www.toneburst.net Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.