ChrisHipgrave Posted October 28, 2006 Report Share Posted October 28, 2006 Hi,I've sorted the PSU and am getting the 14v and 5v needed but my CORE and SID are not showing the right voltages.The CORE module shows the following:-IC1:MCLR(1) - IC1:Vss(12) = 5.16vIC1:Vdd(11) - IC1:Vss(12) = 5.16vIC1:Vdd(32) - IC1:Vss(31) = 0.06v ?????IC2(8 ) - IC2:(5) = 5.18vThe SID module shows the following:-IC1:Vcc(25) - IC1:Vss(14) = 0.70v ?????IC2:Vdd(16) - IC2:Vss(8 ) = 2.55v ?????IC3:Vdd(16) - IC3:Vss(8 ) = 3.58v ?????What should i do?Also there is a kind of crackle noise (like flux melting) when it's turned on, what could this be?Thank youChris Quote Link to comment Share on other sites More sharing options...
TK. Posted October 28, 2006 Report Share Posted October 28, 2006 Hi Chris,it seems, that a track between the 7805 and pin 31/32 is broken, this might affect port J10 as well, accordingly the supply of the SID moduleYou can follow the tracks with the probes of your measuring instrument in order to find the location, where the track is broken or "interrupted". It could also be a bad soldering joint, but this is hard to say w/o knowing, which board version you are usingBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
ChrisHipgrave Posted October 29, 2006 Author Report Share Posted October 29, 2006 it seems, that a track between the 7805 and pin 31/32 is broken, this might affect port J10 as well, accordingly the supply of the SID moduleI've taken the 7805 out and bridged holes 1 and 3. Thats right isn't it? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.