robinfawell Posted November 4, 2006 Report Share Posted November 4, 2006 I have just started using MIOS STUDIO for uploads.When using the tool to upload to Banksticks in the manual mode I've noticed that sometime I see the "received acknowledgement response" and most times not.Is the lack of the message of any concern? Should it be there after every block?I have some problem with my system and it is possible that the Banksicks may be involved.Thanks Robin Quote Link to comment Share on other sites More sharing options...
TK. Posted November 4, 2006 Report Share Posted November 4, 2006 Hi Robin,programming a BankStick takes a little bit more time than programming the internat flash. If acknowledges are missing, it could be, that MIOS Studio already sends the next block before the current block has been programmed.Increasing the delay between SysEx messages, e.g. to 750 mS or more, should helpBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
robinfawell Posted November 6, 2006 Author Report Share Posted November 6, 2006 I have altered the delay to 750mS and even tried 1 second but my observations are the same. Occasionally I see the acknowledgement but mainly not.I am not sure whether this is important or not. But it would promote confidence that the EEProm was being loaded.Regards Robin Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.