zeh Posted December 16, 2006 Report Share Posted December 16, 2006 Hi there,iam having problems with the installation of the application: midibox_seq_v2_4ci updated the bootloader and mios (to 1.9c) on my PIC18F452 SEQ version 2.after the booting process, the display of the SEQv2 says 'READY'. If i try to install the application, nothing happens. if i reboot the midibox, the sysex request is received, after that the upload begins. but it does nothing. can somebody help me ? thanks in advance-zeh Quote Link to comment Share on other sites More sharing options...
moogah Posted December 16, 2006 Report Share Posted December 16, 2006 Hmm, doesn't sound too bad. Can you provide a few more details on what you are uploading with? MIOS Studio? Can you verify that you get the "MIOS v1.9" splash screen at startup? (sounds like you do). If you just start the device without trying to upload code do you get the upload request message more than once? If so than the MIOS upload was not really successful, try again. Quote Link to comment Share on other sites More sharing options...
zeh Posted December 16, 2006 Author Report Share Posted December 16, 2006 hi,thanks for the fast reply.i have a midibox seq v2 with a PIC18F452.i uploaded the bootloader 1.2 with my JDM burner via IC-PROG.after that, i uploaded mios 1.9c via midi with MIOS Studio.now: the box boots. i see a splash screen MIOS 1.9c, then ONE sysex request is sent. after that, the display says "READY."if i try to upload the 2.4c version of the mbseq application, nothing happens.like this:mios_v1_9c_pic18f452.hexHex file contains code in MIOS range, forcing reboot! (reboot is not working, i have to reboot by hand...)Received Upload RequestSending block 00000400-000004FF... now, nothing happens... ;(any suggestions ?thanks-zeh Quote Link to comment Share on other sites More sharing options...
stryd_one Posted December 16, 2006 Report Share Posted December 16, 2006 if i try to upload the 2.4c version of the mbseq application, nothing happens.like this:mios_v1_9c_pic18f452.hexHex file contains code in MIOS range, forcing reboot! That's not the application, you're trying to upload MIOS again :) Quote Link to comment Share on other sites More sharing options...
zeh Posted December 16, 2006 Author Report Share Posted December 16, 2006 its working now... i reburned the pic and reinstalled MIOS. i dont know what was wrong.thanks for your help!-zeh Quote Link to comment Share on other sites More sharing options...
zeh Posted December 16, 2006 Author Report Share Posted December 16, 2006 of course, that was mios again :) some kind of typo, i tryed also the app :)thanks ;) Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.