The III Man Posted June 7, 2007 Report Share Posted June 7, 2007 HI,Hoping someone can helpI am wiring 2 AINS to my core using J5a & J5B using Smash Tvs instructions, I know I also have to connect my AINS to J6 however as there is only one J6 on the core can I chain the AIns and link my second AIN with the J6 pins on my first AIn or do I have to link both AINs directly to the core J6. Alternatively as I am not using J7 could I wire my second AIn to this?Thankstoby Quote Link to comment Share on other sites More sharing options...
TK. Posted June 7, 2007 Report Share Posted June 7, 2007 Hi Toby,the 3 multiplexer control lines of the two AINX4 modules have to be connected together like shown in this schematic: http://www.ucapps.de/mbhp/mbhp_ainx4_64pots.pdfIt doesn't matter, if you link them at the AIN module, or core module side. Only the electrical junctions are important. :)But the control lines should not be connected to J7 of the core module, this port has another purposeBest Regards, Thorsten. Quote Link to comment Share on other sites More sharing options...
The III Man Posted June 7, 2007 Author Report Share Posted June 7, 2007 thanks alot Thorstentoby Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.