cimo Posted December 7, 2007 Report Share Posted December 7, 2007 hallosome updates:the tube preamp/distortion pedal (no graphics yet)waiting for a tube retainer.. ;)a midifying (as "in the way to be midified") Alesis floorboard my MBLC+MB64 with 2 lcds growing..:the panel as it should be:the panel as it is:cheersSimone Quote Link to comment Share on other sites More sharing options...
Sasha Posted December 7, 2007 Report Share Posted December 7, 2007 Cool! Seams you are not to far away. Where are those sliders from? How they feels? Quote Link to comment Share on other sites More sharing options...
cimo Posted December 7, 2007 Author Report Share Posted December 7, 2007 hithey are Alps from RS Components, they seem to be the best faders i ve bought lately still they are not DJ/scratching quality. Quote Link to comment Share on other sites More sharing options...
Sasha Posted December 7, 2007 Report Share Posted December 7, 2007 As far as I can see, they have dust cover. Right? Can you give me RS part No.? Also can you wright more about your controller and software controlling concept. You are going to have LC and MB in same housing with some USB MIDI interface or so? Quote Link to comment Share on other sites More sharing options...
cimo Posted December 7, 2007 Author Report Share Posted December 7, 2007 hi sasa (and all)yes i have bought a Midisport 2X2 to accomplish that.I am a bit concerned with the Hardware atm so i ve left apart the software thing for quite a while, please bear with me and i ll post some more details in the near future.Yes they have dust cover and that is very welcome, i ll be using an analog mixer to mix my timecoded vinyls and do scratchy tricks so these midified faders will be used only to set the volume and mix mp3s from within Ableton.ops it was CONRADs and not RS sorry, here is the PN: 441790 Quote Link to comment Share on other sites More sharing options...
Sasha Posted December 7, 2007 Report Share Posted December 7, 2007 Thank you cimo. I`ll be watching you. I am still cooking my Live controller for a long time, so I might catch some idea from you. ;) Quote Link to comment Share on other sites More sharing options...
bugfight Posted December 7, 2007 Report Share Posted December 7, 2007 lookin good cimo, now if you just had those sparkfun buttons going "bling."*whack*which tube circuit did you use? Quote Link to comment Share on other sites More sharing options...
cimo Posted December 7, 2007 Author Report Share Posted December 7, 2007 @ Jimp fred nachbaur s, RIP, it s linked at tonepad fx, where you can also find the PCBs images for tone transfer Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.